Waste Incinerator|Medical Waste Incinerator|Pet Cremation|Tel: +86-25-8461 0201

Small incinerators for the solid waste equipment in waste management yard HICLOVER TS150(PLC)

Small incinerators for the solid waste equipment in waste management yard. 

Items/Model

TS150(PLC)

Principle

Waste Incineration Treatment

Burn Rate

Average 50-100 kg/hour

Feed Capacity

Average 750kg/feeding

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

1570L

Internal Dimensions

150x100x105cm

Secondary Chamber

750L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

210/230V 50/60Hz

Power

0.9Kw

Oil Consumption (kg/hour)

Average 20.4(D.O)

Thermal capacity(kw/hour)

166-332

Gas Consumption (m3/hour)

***

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

300L

Feed Door

80x60cm

Chimney

10Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800–1000

2nd. Chamber Temperature

1000-1200

Residency Time

2.0 Sec.

Gross Weight

8500kg

External Dimensions

300x160x280cm(without chimney)

Incinerator comprising of a two-stage unit of a primary loading chamber and a secondary after burner chamber. The after-burner system draws hot gases from the primary chamber and ensures a clean burn at 850-1150 degrees Celsius.
Primary Chambe「 volume (m3) Not less than 1.54
Load capacity (kg) Not less than 750
Nominal burn rate (kg/hr) Less than 50
Burn Rate (kg/hr) Plus 50
Thermal capacity (kw/hr) Plus or minus 190
Power supply 50/60hz 210/230v
Diesel Yes
Prefabricated robust mild steel casing not less than lOmm, seam welded and suitably stiffened I braced where necessary. Steel structured painted using high grade paint system. Primary and secondary chamber lining thickness of not less than 180mm, rated at 1430 degrees Celsius. At least three layers of
paint standard as 800 Celsius. thickness 164mm, rated 1750 Celsius
refractory lining in the primary and secondary chambers of not less than 180mm total thickness providing increase fuel efficiency. Lightweight resilient refractory fibre insulation lid providing a tight seal giving thermal efficiency. Weather proof combustion fuel pipes and electrical systems to resist marine type of weather.
Primary Chamber:
Fully insulated internal refractory lining,constructed from high grade refractory brick. High alumina content refractory bricks. Manual operated access lid. Waste ignition burner, temperature controlled on and off with internal air fans. heavy duty 价ebrick 1750 Celsius by wall. refractory cement by Secondary Chamber: bottom and toρ.
Fully insulated internal refractory lining,constructed from high grade low thermal mass insulation. Secondary chamber burnout burner, temperature controlled on and off with internal air fans. Integrated combustion burner air fans with an automatically controlled distribution. Temperature sensor mounted
at the top of the chamber ensuring the chamber reaches the necessary temperature 850I 1100 Degrees Celsius minimum. heavy duty firebrick 1750 Celsius by wall. refractory cement by bottom and toρ.
operation temperature 1000-1200 Celsius
Waste loading and De-Ashing:Loading through the main access door. At the end of every incineration, ash should be discharged through the loading door.primarv chamber: feedina door臼lso ash door). secondary chamber:

HICLOVER – Medical Environmental, WWW.HICLOVER.COM, Waste Incinerators, 
Medical Waste Incinerator,Pet Animal Cremation, Solid Waste Incinerators

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator(Containerized Mobile Incinerator)

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: sales@hiclover.com
Email: hicloversales@gmail.com  
Nanjing Clover Medical Technology Co.,Ltd.



 

2020-07-08

Recent Posts